Yes, the Extang Replacement Front Cab Bow part # EX50995-10 is made of aluminum and is a replacement part for their Express soft tonno cover # EX50995. This cover fits Suzuki and Nissan vehicles with a 6-foot bed.
If you have a cover on your 2006 Silverado it will be a different model. If you click on the linked page you can select your pickup series (1500, 2500 or 3500) and your bed length/type to then see all covers that fit your specific truck. If you then click on Extang you'll see... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75101 you were looking at is designed in the USA but produced in Mexico.
If you are wanting a trailer hitch receiver made in the USA I have a few options.
I recommend the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25132 as it is the only USA made trailer hitch receiver for your 2000 Dodge Ram Pickup that does not require drilling and will fit both long and short bed models with the standard or step rear bumper.
If you are ok with an... view full answer...
The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket # TLA7834 weighs 35 lbs at shipping. You'll have a couple lbs of packing materials so you will be adding around 32-33 lbs to your camper.
For security, I recommend adding the Pin Lock for TorkLift GlowStep Scissor Steps # TLA7509. This is designed to give you the option to easily remove, but also deter theft when installed. view full answer...
The HitchMate TruckStep Extendable Mounted Step For 2 Inch Hitches, Item # HE4045, is made from steel. It will give you a total extension of about 18 inches and will work with your tailgate down. It has a non-slip molded step surface for safety and easier use. It works with 2 inch by 2 inch trailer hitch receivers and has a 500 pound weight capacity.
I have attached a video that gives a great review of the step for you to check out. view full answer...
The Westin Tube Steps mounting brackets are powder coated. They use the factory provided running board mounting holes in the rocker panels. I have checked the install instructions for the Dee-Zee and the Pilot Automotive Tube Steps offered for your vehicle, they all mount in the same manner. GM trucks use the body mount bolts as an attachment point, but Dodge uses the rocker panels.
Westin states that their tube steps have a 300 pound weight capacity, which should be plenty strong enough... view full answer...
The Hollywood Racks Truck Bed Bike Carrier # HRT970 referenced in your question, which is confirmed to fit your 2017 Chevy Colorado, features a black anodized aluminum construction.
This is a really nice rack that can secure 1 bike with a quick-release front wheel in the bed of your truck. The mount can be attached to the truck bed rail, toolbox, or any solid surface. I have attached a short video demonstration on this product that you can also take a look at. view full answer...
The Buyers Products Truck Bed Ladder Rack part # 3371501680 is made overseas but we do have made in USA options like the Thule TracRac TracONE Truck Bed Ladder Rack part # TH27000XTB which is what I recommend for an alternate. view full answer...
The DeeZee Truck Bed Mat # DZ86965 is made of 3/8 inch thick Nyracord. It's designed to hold up to being abused.
If you watch the video I've linked, around the 2:50 mark you'll see bricks dropped into the truck bed to show you how the mat is durable and protects the truck. view full answer...
The Replacement Mounting Hardware and Brackets for Westin Pro Traxx 5" Oval Step Bars item # 21-5372PK are made of steel and then powder coated. view full answer...
The Westin custom-fit bumper # 31012 is built to factory specifications to match your 1998 Dodge Dakota (fits all models but it won't be the exact bumper it came with originally.
The bumper # 31012 is chrome with black steps.
The step pads are a molded polymer plastic which creates a non-slip surface. As a result, provides you solid grip when you get in or out of your vehicle.
Mounting hardware is included as it's a quick and easy bolt-on installation. view full answer...
The Topline Truck Bed Mounted Bike Carrier, part # UG2500, is made of a couple different materials. The main bars are made of aluminum. The clamp that attaches to the bed rail is a black painted aluminum clamp. The clamps that attach to the bike frames are made of plastic with soft rubber pads as to not scratch the bike frames.
I spoke with the installer that did the video you were watching about this kit and he said he was impressed with it. He said it worked really well for the size... view full answer...
Yes. The Xsporter pro is manufactured in China.
However, depending on what year/make/model/bed size of truck you have, we do have great U.S.A.-made Thule ladder racks such as the T-Rac Pro2 Truck Bed Ladder Rack for Compact Pickups # TH37001XT.
Feel free to respond to this answer with your truck information, and I will be happy to find you a U.S.A. solution that works for you. view full answer...
CE Smith Ball Mount Storage Bag # CE27481 has some padding but if you had to power slide around a corner effectively sending the ball mount and bag across the truck bed the mere fact that ball mounts are heavy and metal could be enough to ding the truck bed. With that said under normal conditions and everyday driving I do not anticipate that you would have any problem! view full answer...
The hitch pin weight of 1400 lbs you stated is so close to your payload capacity, but that is not accounting for the 5th wheel hitch and rail weights or the loaded weight with cargo added. Tunda's are notorious for having a lower payload and in this case, I can't tell you it will be fine. The payload weight is spread out over the truck bed where the 5th wheel rails are mounted to the frame directly so are more secure. Unfortunately manufacturers don't test for the 5th Wheel Hitch weight... view full answer...
I spoke with my contact and B&W and the Custom Headache Rack # BWPUCP7500WA is made of 10 gauge steel except for the flat plates that attach to the bed sides. Those are 7 gauge.
This rack is not tested with toolboxes or tonneau covers so it is difficult to determine if it will work in conjunction with those items. It likely will not work if the tonneau cover blocks the lip in the inner part of the bed sides. view full answer...
In the TracOne Truck Bed Ladder Rack for Toyota Tacoma # TH27000XTB-500 the aluminum U-channel and C-channel clamps that allow installation are silver in color as these have a natural finish. I confirmed this with my contact at TracRac. These clamps are available separate from the rack itself as part # TH41500. view full answer...
You are correct that the material under the cover - the panels - of the Lomax Hard Tonneau Cover # LOM45FR are made of aluminum.
The Xceed is a fit for your 2014 Nissan Frontier with a 5 foot bed, and is a simple installation as it just clamps onto your truck's bed rails. It will do a perfect job of offering your Frontier's bed protection will also improving its aerodynamics to resist drag and improve your miles per gallon.
I have added a link below to a video review for you to check... view full answer...
I recommend taking a look at the Malone TradeSport Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs # MAL55VR. This is a very affordable setup that clamps onto the bed rails of your 2018 Nissan Frontier, as long as it is crew cab 5 or 6 foot bed without utili-track system, or if it is king cab 6 foot bed without utili-track system.
T-slot channels are integrated into the crossbars of this ladder rack, making it very easy to install a wide array of accessories like kayak carriers... view full answer...
The Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799 is not made or manufactured in the U.S.A. however, I do have a very similar option that is made and manufactured in the U.S.A. For this, you will want to use the TracRac TracONE Ladder Rack for 2005 to 2015 Toyota Tacoma part # TH27000XTB-TA.
Both the Rola and TracRac ladder racks have an 800 lb. weight capacity, however, the Rola rack comes with a 5 year warranty whereas the TracRac comes with a limited lifetime warranty. view full answer...
Go To Results